4H-SiC has physical properties supremely suited for a variety of high power, high frequency and high temperature electronic device applications. To fully take advantage of the material's potential, several problems remain to be solved. Two of the most important are (1) the characterization and understanding of crystallographic defects and their electrical impact on device performance, and (2) the introduction of acceptor dopants, their activation and control of the final distribution of charge carriers. Two main experimental methods have been employed in this thesis to analyze 4H-SiC material with respect to the issues (1) and (2): electron beam induced current (EBIC) and scanning spreading resistance microscopy (SSRM), respectively. EBIC yields a map of electron-hole-pairs generated by the electron beam of a scanning electron microscope and collected in the depleted region around a junction. EBIC is conducted in two modes. In the first mode the EBIC contrast constitutes a map of minority carrier diffusion lengths. Results from these measurements are compared to white beam syncrotron x-ray topography and reveal a one-to-one correlation between lattice distortions and the electron diffusion length in n+p 4H-SiC diodes. In the second EBIC mode, the junction is highly reverse biased and local avalanche processes can be studied. By correlating these EBIC results with other techniques it is possible to separate defects detrimental to device performance from others more benign. SSRM is a scanning probe microscopy technique that monitors carrier distributions in semiconductors. The method is for the first time successfully applied to 4H-SiC and compared to alternative carrier profiling techniques; spreading resistance profiling (SRP), scanning electron microscopy (SEM) and scanning capacitance microscopy (SCM). SCM successfully monitors the doping levels and junctions, but none of these techniques fulfill the requirements of detection resolution, dynamic range and reproducibility. The SSRM current shows on the other hand a nearly ideal behavior as a function of aluminum doping in epitaxially grown samples. However, the I-V dependence is highly non-linear and the extremely high currents measured indicate a broadening of the contact area and possibly an increased ionization due to sample heating. Finite element calculations are performed to further elucidate these effects. SSRM is also applied to characterize Al implantations as a function of anneal time and temperature. The Al doping profiles are imaged on cleaved cross-sections and the measured SSRM current is integrated with respect to depth to obtain a value of the total activation. The evaluation of the annealing series shows a continuous increase of the activation even up to 1950 °C. Other demonstrated SSRM applications include local characterization of electrical field strength in passivating layers of Al2O3, and lateral diffusion and doping properties of implanted boron.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-64 |
Date | January 2004 |
Creators | Österman, John |
Publisher | KTH, Mikroelektronik och informationsteknik, IMIT, Kista : Mikroelektronik och informationsteknik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | Trita-FTE, 0284-0545 ; 2004:3 |
Page generated in 0.0016 seconds