Return to search

Fracture And Fatigue Behavior Of Concrete-Concrete Interfaces Using Acoustic Emission, Digital Image Correlation And Micro-Indentation Techniques

Currently, the maintenance and repair of civil engineering infrastructures (especially bridges and highways) have become increasingly important, as these structures age and deteriorate. Interface between two different mixes or strengths of concrete also appear in large concrete structures involving mass concreting such as dams, nuclear containment vessels, cooling towers etc., since joints between successive lifts are inevitable. These joints and interfaces are potential sites for crack formation, leading to weakening of mechanical strength and subsequent failure. In case of a bi-material interface, the stress singularities are oscillatory in nature and the fracture behavior of a concrete-concrete bi-material interface is much more complicated.
A comprehensive experimental work has been undertaken for characterization of the behavior of different concrete-concrete interfaces under static and fatigue loading. The effect of specimen size on the concrete-concrete interfaces is studied and the non-linear fracture parameters such as fracture energy, mode I fracture toughness, critical crack tip opening displacement, critical crack length, length of process zone, brittleness number, size of process zone, crack growth resistance curve and tension softening diagram. These parameters are required for modeling the concrete-concrete interfaces in non-linear finite element analysis.
Presently, the advanced non-destructive techniques namely acoustic emission, digital image correlation and micro-indentation have great capabilities to characterize the fracture behavior. The damage in plain concrete and concrete interface specimens is characterized both qualitatively and quantitatively using acoustic emission technique by measuring the width of fracture process zone and width of damage zones. The DIC technique is used to obtain the fracture parameters such as mode I and mode II fracture toughness and critical energy release rate. The micro-mechanical properties are obtained by performing depth-sensing micro-indentation tests on the concrete-concrete interfaces.
Civil engineering structures such as long-span bridges, offshore structures, airport pavements and gravity dams are frequently subjected to variable-amplitude cyclic loadings in actual conditions. Hence, in order to understand the fracture behaviour under fatigue loading, the fatigue crack growth in plain concrete and concrete-concrete interface is also studied using the acoustic emission technique. An attempt is made to apply the Paris’ law, which is applicable to mechanical behaviour of metals, for acoustic emission count data.
All these studies show that, as the difference in the compressive strength of concrete on either side of the interface increases, the load carrying capacity decreases and the fracture parameters indicate the increase in the brittleness of the specimens. It is concluded that the repair concrete should be selected in such a way that its elastic properties are as those of the parent concrete.

Identiferoai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/1115
Date08 1900
CreatorsShah, Santosh Gopalkrishna
ContributorsKishen, M Chandra J
Source SetsIndia Institute of Science
Languageen_US
Detected LanguageEnglish
TypeThesis
RelationG23541

Page generated in 0.0023 seconds