The amount of total and relative sway of a framed or a composite (frame-shear wall) building is of utmost importance in assessing the seismic resistance of the building. Therefore, the design engineer must calculate the sway profile of the building several times during the design process.
However, it is not a simple task to calculate the sway of a three-dimensional structure. Of course, computer programs can do the job, but developing the three-dimensional model becomes necessary, which is obviously tedious and time consuming.
An easy to apply analytical method is developed, which enables the determination of sway profiles of framed and composite buildings subject to seismic loading. Various framed and composite three-dimensional buildings subject to lateral seismic loads are solved by SAP2000 and the proposed analytical method. The sway profiles are compared and found to be in very good agreement. In most cases, the amount of error involved is less than 5 %.
The analytical method is applied to determine sway magnitudes at any desired elevation of the building, the relative sway between two consecutive floors, the slope at any desired point along the height and the curvature distribution of the building from foundation to roof level.
After sway and sway-related properties are known, the requirements of the Turkish Earthquake Code can be evaluated and / or checked.
By using the analytical method, the amount of shear walls necessary to satisfy Turkish Earthquake Code requirements are determined. Thus, a vital design question has been answered, which up till present time, could only be met by rough empirical guidelines.
A mathematical derivation is presented to satisfy the strength requirement of a three-dimensional composite building subject to seismic loading. Thus, the occurrence of shear failure before moment failure in the building is securely avoided.
A design procedure is developed to satisfy the stiffness requirement of composite buildings subject to lateral seismic loading. Some useful tools, such as executable user-friendly programs written by using &ldquo / Borland Delphi&rdquo / , have been developed to make the analysis and design easy for the engineer.
A method is also developed to satisfy the ductility requirement of composite buildings subject to lateral seismic loading based on a plastic analysis. The commonly accepted sway ductility of & / #956 / & / #916 / =5 has been used and successful seismic energy dissipation is thus obtained.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12604907/index.pdf |
Date | 01 May 2003 |
Creators | Tuken, Ahmet |
Contributors | Atimtay, Ergin |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | Ph.D. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0018 seconds