Data conversion is the crucial interface between the real world and digital processing systems. Analogue-to-digital converters and digital-to-analogue converters are two key conversion devices and used as the interface. Up to now, the conventional ADCs based on Nyquist sampling theorem are facing a critical challenge: the resolution and the sampling rate must be radically increased when some applications such as radar detection and ultra-wideband communication emerge. The offset of comparators and the setup time of sample-and-hold circuits, however, limit the resulution and clock rate of ADCs. Alternatively, in some applications such as speech, temperature sensor, etc. signals remain possibly unchanged for prolonged periods with brief bursts of significant activity. If trational ADCs are employed in such circumstances a higher bandwidth is required for transmitting the converted samples. On the other hand, sampling signals with an extremely high clock rate are also required for converting the signals with the feature of sparsity in time domain. The level-crossing sampling scheme (LCSS) is one of the data conversions suitable for converting signals with the sparsity feature and brief bursts of signigicant activity. due to the traditional LCSS with a fixed clock rate being limited in applications a novel irregular data conversion scheme called analogue-to-information system (AIS) is proposed in this thesis. The AIS is typically based upon LCSS, but an adjustable clock generator and a real time data compression scheme are applied to it. As the system-level simulations results of AIS show it can be seen that a data transmission saving rate nearly 30% is achieved for different signals. PLLs with fast pull-in and locking schemes are very important when they are applied in TDMA systems and fequency hopping wireless systems. So a novel triple path nonlinear phase frequency detector (TPNPFD) is also proposed in this thesis. Compared to otherPFDs, the pll-in and locking time in TPNPFD is much shorter. A proper transmission data format can make the recreation of the skipped samples and the reconstruction of the original signal more efficient, i.e. they can be achieved in a minimum number of the received data without increasing much more hardware complexity. So the preliminary data format used for transmitting the converted data from AIS is also given in the final chapter of this thesis for future works.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:562987 |
| Date | January 2010 |
| Creators | Lin, Ming-Lang |
| Contributors | Arslan, Tughrul ; Erdogan, Ahmet |
| Publisher | University of Edinburgh |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/1842/4627 |
Page generated in 0.002 seconds