The aim of this master`s thesis was to design a single-cylinder test engine for measuring of the friction forces between the piston group and the cylinder liner. Main engine parameters are based on the common production engine. A floating liner device was chosen for a friction forces measurement. It was necessary to solve an attachment and sealing of the floating liner. Stress-strain analysis of the floating liner has been done. Next step was to re-design a production crankshaft also with a connected balancing devices for single-cylinder engine. Powertrain was seated in a completely new units. Finally the engine was completed and mounted on a stand.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230480 |
Date | January 2013 |
Creators | Svoboda, Radovan |
Contributors | Svída, David, Novotný, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds