Return to search

Molecular-Size Selective Zeolite Membrane Encapsulated Novel Catalysts for Enhanced Biomass to Liquid (BTL) Processes

80% of energy usage in the word comes from fossil fuels (coal, oil, natural gas) and among the fossil fuels, oil is the most consumed energy source especially in transportation. However, due to concerns about energy demand and energy sustainability, global warming and dependency on foreign oil, generation of renewable fuels is crucial for transportation. Biomass to Liquid (BTL) is a promising process available to produce renewable liquid fuels. BTL fuels have great potential to meet the growing demand for liquid fuels, mitigating climate change, and providing value to rural areas. However, there are two major challenges with biofuels produced from BTL. One of the major challenge is the H2:CO ratio of biomass gasification product is insufficient for production of hydrocarbon fuels due to formation of methane and tars. The steam reforming of hydrocarbons, to improve the H2:CO ratio, is generally conducted as part of the gas conditioning. However, tars cause the catalysts to deactivate rapidly. Secondly, for fuels produced from the gasification route regardless of feedstock source, there is an economy-of-scale issue. Therefore, it is desirable to seek ways of process intensification to allow small scale plants to be more economical. Zeolites can be used to solve these challenges since they have reactant selectivity property.
To achieve a catalyst capable of reforming methane without potential for deactivation by tars, the encapsulation of a core reforming catalyst with porous zeolite shell is examined in this dissertation. After detailed introduction in the first chapter, a composite H-β zeolite membrane encapsulated 1.6wt%Ni/1.2wt%Mg/Ce0.6Zr0.4O2 steam reforming catalyst was prepared by a physical coating method in the second chapter of the study. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) analyses indicated that H-β zeolite was coated successfully on the core reforming catalyst. The pore size of H-β zeolite shell was between 0.43 and 0.57 nm, as measured by the HK method. Steam reforming of CH4 and C7H8 (as a tar model) were conducted with the composite H-β zeolite coated reforming catalyst, the two components individually, and physical mixtures of the two components as a function of temperature (780–840°C). CH4 conversion was enhanced by a factor of 2–3 (depending on temperature) for the composite catalyst as compared to the core reforming catalyst individually even though the zeolite did not have any activity alone. Possible reasons for the enhanced CH4 conversion include confined reaction effects (increase residence time within pores) of the catalyst containing the zeolite coating and/or Al3+ promotion of the active sites. Alternatively, due to molecular-size selectivity, the composite H-β zeolite coated reforming catalyst demonstrated a decrease in C7H8 conversion when compared to the uncoated reforming catalyst. The results validate the use of size selective catalysts to control molecular traffic and enhance the reforming reactant selectivity.
A composite catalyst consisting of an outer layer of zeolite membrane encapsulating an inner reforming catalyst core was synthesized by a double physical coating method to investigate reactant selectivity (ratio of methane/toluene conversion rate) in steam reforming of methane (CH4) and toluene (C7H8). A double encapsulation (51 wt % H-β zeolite) of a 1.6 wt % Ni−1.2 wt % Mg/Ce0.6Zr0.4O2 steam reforming catalyst was compared to a singly coated composite catalyst (34.3 wt % H-β zeolite) to investigate zeolite thickness effects on the conversion of different sized hydrocarbons. The increase in the zeolite content from 34.3 to 51 wt % decreased both CH4 and C7H8 conversions (by up to 14% depending upon the temperature) as a result of the increase in diffusional limitations. Weisz−Prater criteria and Thiele moduli calculations confirmed that the reactions were performed under internal diffusion limitations. The C7H8 conversion of the 51 wt % composite (SR@β51%) catalyst was similar to the zeolite alone, indicating negligible contribution from the protected catalyst core. The reactant selectivity increased by up to 1.5 times on SR@β51% in comparison to the SR@β34.3% composite. Combined reforming at 800 °C on the SR@β51% catalyst indicated that the catalyst was stable during the 10 h time on stream.
Continuing this work, a non-acidic Silicalite-1 zeolite membrane encapsulated 1.6wt%Ni-1.2wt%Mg/Ce0.6Zr0.4O2 steam reforming composite catalyst, synthesized by a physical coating method, was used to investigate effect of encapsulation on size selective steam reforming, using methane (CH4) and toluene (C7H8) as representative species. Weisz-Prater Criteria and Thiele moduli calculations indicated internal diffusion limitations. Combined reforming of CH4 and C7H8 at 800°C on the composite catalyst demonstrated stability during the 10 h time on stream while uncoated SR catalyst deactivated. The non-acidic Silicalite-1 encapsulated catalyst showed decreases (~2-7%) in both CH4 and C7H8 conversions compared to acidic H-β zeolite confirming that shell acidity did contribute to conversion and suggesting that shell defects/grain boundaries were responsible for the C7H8 conversion.
Finally, low temperature 0.16wt%Pt–1.34wt%Ni–1.00wt%Mg/(Ce0.6Zr0.4)O2 reforming catalyst was triple coated with H-β zeolite (60 wt% of zeolite) to be utilized synthesis of combination steam reforming catalyst (SR) and Fischer-Tropsch Synthesis (FTS) catalyst (CRAFT) for a single-step conversion of methane to liquid fuels. Scanning electron microscopy (SEM) image and energy-dispersive spectroscopy (EDS) analysis result demonstrated that H-β zeolite was successfully encapsulated onto the low temperature reforming catalyst. The catalyst was tested in steam reforming of methane (CH4) and toluene (C7H8) and the results was compared with 51 wt%. While CH4 conversions are very similar on the 60wt% composite catalyst with 51wt% composite catalyst, no C7H8 conversion was seen on the 60 wt% composite catalyst. Thus, it is concluded that the 60 wt% composite catalyst can be utilized to synthesis CRAFT catalyst.

Identiferoai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-7841
Date03 April 2017
CreatorsCimenler, Ummuhan
PublisherScholar Commons
Source SetsUniversity of South Flordia
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceGraduate Theses and Dissertations
Rightsdefault

Page generated in 0.003 seconds