The present thesis deals with a theoretical description of issues regarding chemical bonding, structure and stability of transition metal carbides and multilayered structures. First principles density functional theory has been used extensively to investigate the properties of alloyed solutions of transition metal carbides. Joint theoretical and experimental investigations have shown that there is a driving force for carbon to be released from these ternary carbide systems as a response to the alloying. This release of carbon was shown to yield favorable lubricating properties in the case of alloyed solutions of Ti-Al-C, that were not present in the case of pure TiC, a property that can be used to design new materials that combine high hardness with favorable tribological properties. From calculations of the activation energy of C diffusion in the vicinity of substitutional transition metal impurities (M) in TiC, it is found that the mobility of C atoms is increased due to the presence of the impurities. The lowering of the activation energy barriers suggests that the mobility of C in alloyed solutions of Ti-M-C is increased and will be more pronounced at lower temperature than for C diffusion in TiC. The magnetic properties of alloyed solutions of Ti-Fe-C has been investigated using both theory and experiment. Theoretical calculations reveal that the magnetic moment and the critical temperature increase when increasing the Fe content as well as when lowering the C content in the system. Furthermore, the magnetic exchange parameters between Fe atoms were found to clearly reflect changes in the chemical bonding when varying the C content. Experimentally the magnetic properties were found to be rather substantial. Furthermore, the magnetic properties changes upon annealing due to the formation of Fe-rich and Fe-poor regions in the system. After long enough annealing times precipitates of α-Fe are formed which is consistent with theoretical predictions. The interaction between TiC(111) surfaces and C in the form of graphite has also been investigated. For these systems it was found that graphite was rather strongly bonded to the carbide surface and that the atomic as well as electronic structure at the interface depend on the termination of the carbide surface. This research was motivated by the recent interest in graphene, but also to investigate how carbide grains interacts with C when dispersed in a carbon matrix. A model for the calculation of structural parameters in multilayer structures has been presented and evaluated. The model is based on classical elasticity theory and uses the elastic constants of the materials constituting the multilayer as the only input.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-123485 |
| Date | January 2010 |
| Creators | Råsander, Mikael |
| Publisher | Uppsala universitet, Materialteori, Uppsala : Acta Universitatis Upsaliensis |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, 1651-6214 ; 749 |
Page generated in 0.0022 seconds