The hydraulic fracturing treatment is an essential tight sand gas reservoir
stimulation that employs viscous fluid to break the formation rock to create a fracture
and transport the propping agent to support the fracture from naturally healing. Despite
proven economic benefit, the hydraulic fracture fluid damages the producing formation
and the propped fracture. To analyze the gel damage effect quantitatively, the filter cake
thickness is used as a parameter that has not been measured before.
This project was divided into two stages. The first stage built up a filter cake and
measured the filter cake thickness by a laser profilometer. A correlation between leakoff
volume and filter cake thickness was produced. The second stage eroded the filter cake
by flowing original fracturing fluid through the core sample to study the fracturing fluid
shear clean up effect on filter cake thickness.
The filter cake was built up in the lab and the thickness was measured with
different methods. The profilometer has been tested as an effective tool to measure the
filter cake thickness. A correlation for crosslinked guar fracture fluid filter cake thickness was produced. An experiment setup used to shear erode the filter cake was
built and tested. The results showed the filter cake was not eroded at 200 s-1 shear rate.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/ETD-TAMU-2010-05-7652 |
| Date | 2010 May 1900 |
| Creators | Xu, Ben |
| Contributors | Hill, Dan, Zhu, Ding |
| Source Sets | Texas A and M University |
| Language | en_US |
| Detected Language | English |
| Type | thesis, text |
| Format | application/pdf |
Page generated in 0.0074 seconds