Includes bibliographical references. / Worldwide increases in environmental awareness have led to the development of new innovative technologies aimed at site remediation and hazardous waste treatment. Solidification/Stabilisation (S/S) is one of such technologies and it has emerged as an environmentally acceptable treatment option for hazardous waste. Initially applied to inorganic wastes, S/S is now being investigated for the treatment of organic wastes and sludges. Challenges facing this venture into the SIS of organic wastes include the lack of technical information on waste-binder interactions, the uncertainty regarding an appropriate method to evaluate the performance of CPS systems, as well as evaluation of the long-term stability of stabilised material. This paper attempts to expand the understanding of chemical and micro-structural waste-binder interactions. Also addressed is the weathering behaviour of stabilised/ solidified organic waste when exposed to two different leaching media, distilled water and the US EPA's Toxicity Characteristic Leaching Procedure (TCLP) solution. Addressed to a minor extent is the effect of stabilised/solidified organic waste on biomass production of sweetcorn maize. The focus in this study was the stabilisation of the synthol sludge (synthol gunk) using a pozzolan system. This was done by preparing stabilised waste forms from synthol gunk and fine ash (ash obtained from the slimes dams, hence has hydrated to some extent). A particle size fraction less than 2 mm of these waste forms were leached with the two leaching solutions. Some of the material was pressed into pellets, which were subsequently leached in the same leaching solutions. The pellets were analysed under SEM-EDS for micro-structural analysis. In a separate set of experiments fine ash, synthol gunk and the stabilised waste forms were mixed with soil in the range 0% to 30% waste addition, after which sweetcorn maize was planted to study the effects on biomass production. Other instrumental techniques used in this study include WDXRF, ICP-MS, FTIR, IC as well as the analysis of dissolved organic carbon (DOC). The study showed that the trace metal speciation of the pozzolanic binder is affected by the presence of the organic waste, with a possible threat of turning the binder into a hazardous material. Elements that were leachable by TCLP on the stabilised product include B, Mn, Ni, Fe, and Br. The addition of lime in the system appears to lower the leachability of B, Mn, and Br while worsening the leachability of Fe, Ba, and Zn. However, addition of lime increases the leachability of B, Cr, Mn, Fe and Br in distilled water. The most likely source of B, Fe, Br and Ba is fine ash. Plant growth studies showed that the toxicity threshold of synthol gunk in the stabilised material on biomass production appears to be lowered from about 2.5% in unstabilised synthol gunk to about 1.2% either due to synergy or the additive effect of ash and synthol gunk. Furthermore, it is likely that some of the toxicity of synthol gunk is due to the hydrophobic coating of roots resulting in inadequate water intake by the plant.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/7403 |
| Date | January 2002 |
| Creators | Makhathini, S. C. |
| Publisher | University of Cape Town, Faculty of Science, Department of Geological Sciences |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Master Thesis, Masters, MSc |
| Format | application/pdf |
Page generated in 0.0019 seconds