In this Master of Science thesis screws with different coatings were exposed to an accelerated corrosion test in order to investigate the corrosion development. The test matrix constituted of hexagonal and flange screws (fastened on frames) coated with either zinc/iron (ZnFe) or a flake system of aluminum and zinc (GEOMET). The corrosion results were analyzed by means of X-ray diffraction (XRD). In this study the screws were also crosscut and analyzed by means of FEG-SEM in order to determine the thickness and the elemental content of the surface coating. The result of the corrosion test showed that the screws coated with GEOMET showed a very good corrosion resistance whilst the screws coated with ZnFe failed to fulfill the demands on corrosion resistance of Scania.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-40473 |
| Date | January 2011 |
| Creators | Björlenstam, Philip |
| Publisher | KTH, Korrosionslära |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0016 seconds