This thesis deals with the use of the electronic measuring systems for monitoring structures. The first part of this work is focused on mapping the available measuring systems for monitoring deformations and strains, from the point of their measurement accuracy, the real advantages and disadvantages, including examples of monitoring of constructions. In the second part were selected measuring systems for monitoring strains and deflection interest structure. Subsequently, the measuring system with online recording into the tested roof structure was installed and the loading test was performed. Obtained data were compared with other two independent measurements. In the last part of the thesis, the measured values of each independent measurements were compared together, and with the values calculated from the mathematical model. The achieved results show that the installed monitoring system is capable to reliably measure deformation of the structure in real time and thus to warn the building administrator against the potential danger in advance.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:451212 |
Creators | Kovács, Pavel |
Contributors | Zich, Miloš, Doc.Ing. Karel Kubečka, Ph.D, Daněk, Petr |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds