The aim of the diploma thesis was to analyze qualitative outages in the production of gears for a gear pump and to minimize them. The largest amount of outages was caused by the burning of the surface during face grinding. After analyzing the current state of production there were created some suggestions to avoid this issue. Also there was found some space to speed up the whole process. Suggestions to eliminate burning have been tested with minimal impact on production. The reduction of outages for burned surface was achieved and also the cycle time was shortened. Those suggestions will be implemented in serial production.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:455370 |
| Date | January 2021 |
| Creators | Petříček, Vít |
| Contributors | Jaroš, Aleš, Fiala, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds