An analysis of the influence of undercutting on the stress concentration factor for undercut gears using the finite element method is presented. The models used are in the shape of a whole gear with three teeth. The middle tooth is loaded assuming single-tooth contact. Thirty seven finite element models were used to compute stress concentrations in gear teeth. The results for non-undercut gears were compared with the Dolan and Broghamer results, and were not more than 9.5 percent different. The results are expressed in the form of a linear relationship giving the stress concentration factor at the root fillet as a function of the geometry of the tooth. It has been verified that this equation is an accurate formula for both undercut and non-undercut gears with nominal proportions. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/76013 |
Date | January 1983 |
Creators | Jalilvand, Jamshid |
Contributors | Mechanical Engineering |
Publisher | Virginia Polytechnic Institute and State University |
Source Sets | Virginia Tech Theses and Dissertation |
Language | en_US |
Detected Language | English |
Type | Thesis, Text |
Format | xi, 96 leaves, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 11012106 |
Page generated in 0.0015 seconds