Made available in DSpace on 2014-12-17T15:01:19Z (GMT). No. of bitstreams: 1
MiguelASN.pdf: 491289 bytes, checksum: be60500500779f6a3fd87b90108feb8c (MD5)
Previous issue date: 2002-09-27 / The developments in formulating drilling fluids to apply in petroleum fields are based on new technologies and environmental challenges, where the technical performance of a developed drilling fluid is used to produce a minimum environmental impact, showing great economy in costs.
It is well known that the potential use of oil-based drilling fluids is limited because these fluids when discharged in the sea do not disperse as much as water-based ones and may form waterproof films in the seabed, having a profound effect on plants and animals living in this environment. The current works have been made in investigating fluids called pseudofluids, which are synthetic ester-based, n-paraffin-based and other fluids formed from inverse emulsion. In this research the principal parameters involved in inverse emulsion process were studied, in laboratory scale, using esters as main component. Others commercial drilling fluids were used as comparative samples, as well as samples from laboratory and field where these drilling fluids are being applied. Concentrations of emulsifier and organophilic clay, which are viscosity donor, were varied to verify the influence of these parameters, in different oil/water ratios (55/45, 60/40, 65/35, 70/30, and 75/25). The salt concentration (NaCl) is an indicative parameter of stability and activity of an esterbased fluid. In this research the salt concentration was varied in 10,000, 20,000, and 50,000 ppm of NaCl. Some rheological properties of the produced fluids were studied, such as: initial gel, plastic viscosity, yield point, and apparent viscosity. Through the obtained rheological measures, the existence of two systems could be verified: fluid and flocculated. It could be noticed that the systems were influenced, directly, by the oil/water ratio and emulsifier, organophilic clay and NaCl concentrations. This study showed the viability to use an ester obtained from a regional vegetable product baba?u coconut oil to obtain an efficient and environmental safe drilling fluid / O desenvolvimento atual e futuro, em campos de petr?leo, baseia-se em novas tecnologias e desafios ao meio ambiente, onde se utiliza principalmente a performance t?cnica de um fluido de perfura??o que produza o m?nimo impacto ambiental, mostrando ainda, uma ?tima economia nos custos desses desenvolvimentos. Sabe-se que o potencial de continuidade de fluidos de perfura??o a base de ?leo est? limitado e, por conseguinte, o avan?o ambiental tem sido na investiga??o de fluidos chamados pseudo-fluidos, ou seja, fluidos sint?ticos base ?ster, ?ster, n-parafina e outros fluidos de emuls?o inversa, os quais est?o em estudo. Neste trabalho estudou-se em n?vel de laborat?rio as principais vari?veis envolvidas no processo de emuls?o inversa usando ?steres como componente principal, utilizando-se amostras comparativas de outros fabricantes, como tamb?m amostras provenientes de laborat?rio e de campo onde est?o sendo utilizados estes fluidos de perfura??o. As concentra??es de emulsificante ou argila organof?lica, que ? doadora de viscosidade, foram variadas para verificar a influ?ncia destes par?metros a diferentes raz?es ?leo/?gua (55/45, 60/40, 65/35, 70/30 e 75/25), mantendo-se constante os demais componentes do fluido. A concentra??o do sal, que ? um par?metro indicador de estabilidade e da atividade em fluido a base ?ster, foi variada em 10.000, 20.000 e 50.000 ppm de NaCl. Algumas propriedades reol?gicas dos fluidos assim produzidos foram estudadas, tais como: gel inicial, viscosidade pl?stica, limite de escoamento e viscosidade aparente. A partir das medidas reol?gicas obtidas, p?de-se verificar a exist?ncia de dois sistemas: fluido e floculado. P?de-se perceber que os resultados obtidos foram influenciados diretamente pela raz?o ?leo/?gua e pelas concentra??es do emulsificante, da argila organof?lica e do NaCl. Este estudo consolidou importantes conhecimentos que abrir?o portas para o sucesso de novas pesquisas, tornando-se fundamental a viabiliza??o de coloc?-lo posteriormente no mercado de trabalho do Brasil
Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/15775 |
Date | 27 September 2002 |
Creators | Silva Neto, Miguel Arcangelo da |
Contributors | CPF:07286937391, http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783139Z0&dataRevisao=null, Mahomed, Rahoma Sadeg, CPF:81514778904, http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787823E6, Moura, Maria Carlenise Paiva de Alencar, CPF:21414130368, http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702157Y9, Dantas Neto, Afonso Avelino, Dantas, Tereza Neuma de Castro |
Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Engenharia Qu?mica, UFRN, BR, Pesquisa e Desenvolvimento de Tecnologias Regionais |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
Format | application/pdf |
Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0027 seconds