The speed control of a Brushless DC Motor Drive in the presence of load disturbance is investigated. Firstly some practical results are presented where a simple proportional-integral speed controller is used in the presence of a large step input speed demand as well as load disturbance. The wind-up problem caused by the saturation of the controller is discussed. In order to improve the performance of the proportional-integral speed controller in the presence of load variation, a load estimator is used with torque feedforward control. The results presented show the speed holding capability in the presence of load variation is significantly improved. A genetic algorithm is used on line to optimise the controller for different conditions such as large and small step input speed demand and load disturbance. The results presented show that a genetic algorithm is capable of finding the tuning of the controller for optimal performance. Single-input single-output and two-input two-output fuzzy speed controllers are also used and the results compared to a proportional-integral controller. Results are presented showing that a single-input single-output fuzzy controller works as a proportional controller with variable gain whereas the two-input two-output fuzzy controller is capable of driving the motor at variable speed and load torque with excellent performance. The robustness of the fuzzy controllers is compared to the proportional-integral controller and the results presented show that the fuzzy one is more robust then the proportional-integral. A genetic algorithm is also used on line for the optimisation of the two-input twooutput fuzzy speed controller and the results show that despite the large number of parameters to be optimised, the tuning for optimal performance is also possible.
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:285738 |
Date | January 1999 |
Creators | Goncalves da Silva, Wander |
Publisher | University of Newcastle Upon Tyne |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | http://hdl.handle.net/10443/673 |
Page generated in 0.0018 seconds