Inversion and Depth Range of Dipole Electromagnetic Induction Measurements in Geophysics Fernando César Moura de Andrade Institute of Hydrogeology, Engineering Geology and Applied Geophysics Faculty of Science, Charles University Electromagnetic induction geophysical methods are, basically, composed by a transmitter which produces a magnetic field and a set of receivers which measure the primary magnetic field, from the transmitter, superimposed by secondary magnetic fields inducted in the subsurface. Equipment operating at, relatively, low frequencies and with short distances between the transmitter and the receivers are usually called conductivity meters and operate at low inductions numbers. The depth of investigation, in such kind of equipment, depends mainly on the transmitter-receiver distance, on the orientations of the magnetic dipoles and the height of the instrument from the ground, in order that a depth sounding can be done changing these parameters in a single measurement location. Making a series of these multi-configuration measurements, two-dimensional, or even three-dimensional surveys, can be performed and, subsequently, inverted in order to produce an image of the subsurface of the earth. Forward modelling and inversion of multi-configuration electromagnetic induction data can be made...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:404560 |
| Date | January 2019 |
| Creators | Moura de Andrade, Fernando César |
| Contributors | Fischer, Tomáš, Godio, Alberto, Velímský, Jakub |
| Source Sets | Czech ETDs |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0101 seconds