In this thesis two methods for the manufacturing of optical elements for the monolithic integration in CMOS image sensors are described. Polymeric micro colour filters and refractive micro lenses are presented. The colour filters were made of polyimid thin films with the colours Cyan, Yellow and Magenta. 9 x 9 um^2 filters were deposited on previously planarised CMOS substrates. Optical constants are measured by spectroscopic ellipsometry. The optical constants were used to calculate the colour sensor responses which are in good agreement with the experimental values. Raytracing calculations are used to evaluate the improvement of the responsivity by the use of microlenses. It is shown that the architecture of the pixel layout have to be considered to adapt the lens parameters. For the fabrication of the lenses Polymethyl-Methacrylat (PMMA) was used as a hight transparent material. By the melting of PMMA structures the lenses were obtained. A microlens array was deposited on a glass plate to determine the focal length by the following procedure. By illuminating the microlens array with laser light the focused beam was analysed with a microscope objective. It is estimated that the improvement in responsivity could be as high as 30 % with such a PMMA microlens array.
| Identifer | oai:union.ndltd.org:DUETT/oai:DUETT:duett-05292001-185614 |
| Date | 30 May 2001 |
| Creators | Schicketanz, Peter |
| Contributors | Prof. Dr. rer.nat Günter Zimmer, Prof. Dr. Wolfgang Karthe |
| Publisher | Gerhard-Mercator-Universitaet Duisburg |
| Source Sets | Dissertations and other Documents of the Gerhard-Mercator-University Duisburg |
| Language | German |
| Detected Language | English |
| Type | text |
| Format | text/html, application/pdf |
| Source | http://www.ub.uni-duisburg.de/ETD-db/theses/available/duett-05292001-185614/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. Hiermit erteile ich der Universitaet Duisburg das nicht-ausschliessliche Recht unter den unten angegebenen Bedingungen, meine Dissertation, Staatsexamens- oder Diplomarbeit, meinen Forschungs- oder Projektbericht zu veroeffentlichen und zu archivieren. Ich behalte das Urheberrecht und das Recht das Dokument zu veroeffentlichen und in anderen Arbeiten weiterzuverwenden. |
Page generated in 0.0027 seconds