Return to search

Filmes LbL contendo o nanohíbrido Pt-SiPy+Cl- e polieletrólitos aniônicos como sensores e biossensores eletroquímicos / LbL Films containing the Pt-SiPy+Cl- nanohybrid and anionic polyelectrolytes as sensors and biosensors electrochemical

Made available in DSpace on 2017-07-20T12:37:38Z (GMT). No. of bitstreams: 1
Vagner dos Santos1.pdf: 3358133 bytes, checksum: 5d65fc2649ed2010f554ec6574971249 (MD5)
Previous issue date: 2013-06-20 / Conselho Nacional de Desenvolvimento Científico e Tecnológico / This thesis describes the use of the chloride of 3-n-propyl-pyridinium-silsesquioxane polymer (SiPy+Cl-) as an efficient stabilizer for the synthesis of platinum nanoparticles (NPs-Pt). Transmission Electron Microscopy (TEM) and measurements of dynamic light scattering (DLS) showed good distribution of NPs-Pt (3-40 nm) in the cavities of the SiPy+Cl-. The nanohybrid (Pt-SiPy+Cl-) obtained was used as polycation in the preparation of thin films by the Layer-by-Layer (LbL) technique. In order to investigate the electrocatalytic properties, films were obtained by the alternated deposition of the polyanions poly-2,5-metoxipropiloxisulfonated-phenylenevinylene (PPV-SO3) and acid (polyvinylsulfonic) (PVS) with Pt-SiPy+Cl- polycation in the architectures (PPV/Pt-SiPy+Cl-)n, (Pt-SiPy+Cl-/PPV)n, (PVS/Pt-SiPy+Cl-)n and (Pt-SiPy+Cl-/PVS)n, respectively. The deposition of the films was monitored by UV-Vis spectroscopy, which showed a linear growth in each bilayer deposited. In addition, it was observed by UV-Vis spectra that the deposition sequence initiated by polyanions (PPV-SO3 or PVS) showed higher absorbance, indicating that the architectures (PPV/Pt-SiPy+Cl-)n and (PVS/Pt-SiPy+Cl-)n contain more species of NPs-Pt available on the surface of the films. The presence of polyelectrolytes in the films and the interaction between them were verified by Infrared spectroscopic (FTIR) and Raman. Electrochemical measurements for the detection of DA, with the LbL films from PVS e Pt-SiPy+Cl-, showed that the oxidation currents for the (PVS/Pt-SiPy+Cl-)3 in presence of its interferent the ascorbic acid (AA) were more intense, with a difference between the oxidation potential equal to 550 mV at pH 7. For the films containing PPV-SO3 and Pt-SiPy+Cl- it was found that the presence of PPV-SO3 is crucial to help the NPs-Pt in the process of electron transfer. The (PPV/Pt-SiPy+Cl-)3 LbL film detected simultaneously the DA and the interferents AA and uric acid (UA) (ΔE = 640 mV) with an oxidation potential difference of 90 mV higher than the observed with the (PVS/Pt-SiPy+Cl-)3 LbL film containing PVS (ΔE =550 mV). In addition, the better values of sensitivity (2,7 μmol L-1), detection limit (LD = 3,19 x 10-7 mol L-1), quantification limit ( LQ = 2,07 x 10-6 mol L-1) were observed in the studies with the LbL films (PPV/Pt-SiPy+Cl-)3 instead of PVS. In order to mimic a biological system, the LbL film (PPV/Pt-SiPy+Cl-)3 was selected to DA detection confined into liposomes from dipalmitoyl phosphatidylcholine (DPPC). This film provided a difference of oxidation potential of 350 mV of the encapsulated DA, in the presence of AA and UA interfering. In vitro measurements for the detection of DA in striatal rat brain were performed successfully with drop-coated film of polyelectrolyte PPV and Pt-SiPy+Cl-, immobilized on screen-printed carbon electrode. Besides this analyte, the architectures of LbL films (PPV/Pt-SiPy+Cl-)n and (Pt-SiPy+Cl-/PPV)n were used in the detection of H2O2 and glucose. After immobilization of glucose oxidase (GOx) on the surface of the films, the biosensor (PPV/Pt-SiPy+Cl-)6GOx exhibited sensitivity = 1.17 μmol L-1, LD = 27.4 μmol L-1, LQ = 91.4 μmol L-1 e app m k = 2.64 mmol L-1, values greater than more complex films reported in the literature, demonstrating the importance of NPsPt for these films. / Esta tese descreve o uso do polímero cloreto de 3-n-propil-piridínio-silsesquioxano (SiPy+Cl-) como um eficiente estabilizante para síntese de nanopartículas de platina (NPs-Pt). Imagens de Microscopia Eletrônica de Transmissão e medidas de espalhamento dinâmico de luz indicaram boa distribuição das NPs-Pt (3-40 nm) nas cavidades do SiPy+Cl-. O nanohíbrido Pt-SiPy+Cl- obtido foi utilizado como policátion na preparação de filmes finos pela técnica Layer-by-Layer (LbL). Para investigação das propriedades eletrocatalíticas das NPs-Pt incorporadas ao SiPy+Cl-, obteve-se filmes pela deposição alternada dos poliânions poli-2,5-metoxipropiloxi-sulfonado fenilenovinileno (PPV-SO3) e ácido-polivinilsulfônico (PVS) com o policátion Pt-SiPy+Cl-, nas arquiteturas (PPV/Pt-SiPy+Cl-)n e (Pt-SiPy+Cl-/PPV)n, (PVS/Pt-SiPy+Cl-)n e (Pt-SiPy+Cl-/PVS)n, respectivamente. A deposição nos filmes LbL foi monitorada por espectroscopia de absorção na região do UV-Vis, a qual revelou um crescimento linear dos filmes a cada bicamada depositada. Além disso, nos espectros UV-Vis foi constatado que a sequência de deposição iniciada pelos poliânions (PPV-SO3 ou PVS) apresentou maior absorbância, indicando que nas arquiteturas (PPV/Pt-SiPy+Cl-)n e (PVS/Pt-SiPy+Cl-)n há mais espécies disponíveis de NPs-Pt na superfície dos filmes. A presença dos polieletrólitos nos filmes e a interação entre estes foram constatadas por medidas espectroscópicas de infravermelho (FTIR) e Raman. Nas medidas eletroquímicas para detecção de DA, com os filmes formados por PVS e Pt-SiPy+Cl-, verificou-se que o (PVS/Pt-SiPy+Cl-)3 apresentou correntes de oxidação para a DA mais intensas em meio ao interferente ácido ascórbico (AA), com uma diferença entre os potenciais de oxidação igual a 550 mV, em pH 7. Nos filmes contendo PPV-SO3 e Pt-SiPy+Cl- verificou-se que a presença do PPV-SO3 é fundamental para auxiliar as NPs-Pt no processo de transferência de elétrons. O filme LbL (PPV/Pt-SiPy+Cl-)3 detectou simultaneamente a DA em meio aos interferentes AA e ácido úrico (AU) (ΔE = 640 mV), com uma diferença de potenciais de oxidação 90 mV maior do que a observada com o filme contendo PVS (550 mV). Além disto, melhores valores de sensibilidade (2,7 μmol L-1), limite de detecção (LD = 3,19 x 10-7 mol L-1) e limite de quantificação (LQ = 2,07 x 10-6 mol L-1) foram observados nos estudos com o filme LbL (PPV/Pt-SiPy+Cl-)3 em relação ao PVS. A fim de mimetizar um sistema biológico, escolheu-se o filme LbL (PPV/Pt-SiPy+Cl-)3 para detecção de DA confinada nos lipossomos de dipalmitoilfosfatidil colina (DPPC). Este filme possibilitou uma diferença de potencial de oxidação de 350 mV da DA encapsulada, na presença dos interferentes AA e AU. A partir desta constatação, medidas in vitro para a detecção de DA em estriados cerebrais de ratos foram realizadas com sucesso com o filme drop-coated dos polieletrólitos PPV e Pt-SiPy+Cl-, imobilizados sobre eletrodo de carbono impresso. Além deste analito, as arquiteturas dos filmes LbL (PPV/Pt-SiPy+Cl-)n e (Pt-SiPy+Cl-/PPV)n foram utilizadas na detecção de H2O2 e glicose. Após imobilização de glicose oxidase (GOx) na superfície dos filmes, o biossensor (PPV/Pt-SiPy+Cl-)6GOx exibiu sensibilidade = 1,17 μmol L-1, LD = 27,4 μmol L-1, LQ = 91,4 μmol L-1 e appmk = 2,64 mmol L-1, valores estes superiores a filmes mais complexos relatados na literatura, demonstrando a importância das NPsPt para estes filmes.

Identiferoai:union.ndltd.org:IBICT/oai:tede2.uepg.br:prefix/3
Date20 June 2013
CreatorsSantos, Vagner dos
ContributorsWohnrath, Karen, Fujiwara, Sérgio Toshio, Crespilho, Frank Nelson, Dall'antonia, Luiz Henrique, Souza, Vagner Roberto de
PublisherUNIVERSIDADE ESTADUAL DE PONTA GROSSA, Programa Associado de Pós-Graduação em Química - Doutorado, UEPG, BR, Físico Química, Química Analitica, Química Organica, Química Inorgânica
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UEPG, instname:Universidade Estadual de Ponta Grossa, instacron:UEPG
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0032 seconds