D.Ing. (Civil Engineering) / This thesis describes an Investigation Into the nature of the fracture and deformation mechanism which occur at the edges of tabular gold mining excavation. Published Information on these phenomena Is reviewed, and the necessary underground Investigation required to consolidate the previous work Is described. It Is concluded that the rock near the reef plane at the edges of these mining excavations Is subject to stresses sufficiently high to cause It to fracture through the formation of regular patterns of shear planes. These fractures can form In the solid rock some distance ahead of the mining excavation. Nearer the mining face, extension fractures form which result In slabbing or splitting of the exposed rock. An Idealization of the observed rock behavior Is proposed, which Is then incorporated with conventional boundary element techniques Into a numerical model (SEAMS) which Is capable of analyzing two Dimensional tabular mining excavations where the rock near the reef plane at the edge of the mining excavation fractures, deforms and sheds load. A Sensitivity analysis of the numerical model Is described which Identifies those mining parameters capable of being used to advantage In controlling the size of the fracture zone.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:12225 |
| Date | 10 September 2014 |
| Creators | Brummer, Richard Kenneth |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
| Rights | University of Johannesburg |
Page generated in 0.0019 seconds