Thesis(MTech (Chem.Eng.Technology))--//Cape Technikon, 1999 / The gold mining industry has mainly relied upon the use of a highly polluting chemicals,
such as mercury and cyanide, to recover gold from its ores. As environmental legislation has become more stringent in all countries and environmental protection has become the focus of world-wide research, development of environmental sound processes has been favoured. The Coal Gold Agglomeration (CGA) process is such a process which was developed some years ago and has the advantage in that gold is recovered by a procedure which has little or no effect on the environment. The CGA process is based on the hydrophobic characteristics of coal, gold and oil. Gold particles which are substantially free become attached to the coal-oil agglomerates during collision, and eventually penetrate into the agglomerates. The resulting agglomerates are recycled to increase the gold loading, separated from the slurry, burnt, ashed and smelted to produce gold bullion. Laboratory scale batch tests were performed on an artificial/synthetic gold ore, containing fine gold powder. The slurry was contacted with a mixture of coal and oil. i.e. coal-oil
agglomerates, after which both the agglomerates and ore were analysed for gold. Operating parameters, such as the mode of contact between the coal-oil phase and the gold containing slurry, contact time of the slurry and the coal-oil phase, means of separating the coal-oil gold agglomerates from the slurry, coal to ore, coal to oil and water to ore ratios, type of oil, effect
of collectors and the mineralogy of the ore on the gold recovery were investigated.
Results have shown that stirring the coal-oil phase and the slug yielded higher gold loadings than shaking and the traditional rolling bottle technique. BI increasing the time of contact between the coal-oil phase and the gold slurry. the final gold loading in the agglomerates increases, until an equilibrium value is reached. An increase in the amount of coal, together with a decrease in the amount of water used in the slurry, has shown to increase gold recoveries. Furthermore, by varying the concentration and volume of a collector. such as potassium amyl xanthate (PAX) enhanced the settling rate and enabled the effectiveness of separation. Moreover, it was found that the gold loading on the coal-oil phase increased after
recycling it. Further tests were performed on a real ore sample and after X-ray Diffraction
(XRD) analysis, it was found that certain minerals other than gold was transferred to the coal-oil phase.
The theoretical foundation of the CGA process is based on the difference in free energy and
was expressed as a function of the interfacial tensions and three-phase contact angles between gold, oil and water, together with the ratio of coal-oil agglomerate to gold particle radii, as the free energy is a measure of the thermodynamic stability and hence, partly a measure of gold recoveries, meaningful predictions as to gold recoveries were made by performing a sensitivity analysis on the variables connected to the free energy, It was, however, found that
some operating parameters, which were linked to other factors, such as the maximum gold
transfer into coal-oil phase and the separation efficiency of the agglomerates. were vital to be taken into account when predictions as to gold recoveries were made. Therefore, the gold recoveries were found to be a function of the thermodynamic stability as well as the maximum gold transfer into the coal-oil phase and the separation efficiency of the agglomerates, The meaningful information gained by performing the theoretical investigations were applied and
linked to gold recoveries, thereby providing useful explanations as to the typical gold
recoveries obtained during experimentation.
A comparative study on mercury amalgamation was done to evaluate the performance of the
CGA process. It was found that the CGA process yielded better gold recoveries than
amalgamation, which makes it the better process both in terms of recoveries as well as environmental safety, A further application of the theoretical knowledge was, however, very useful to explain the tendency of the CGA process yielding the better results.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cput/oai:localhost:20.500.11838/869 |
Date | January 1999 |
Creators | Bouwer, Wendy |
Publisher | Cape Technikon |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis |
Rights | http://creativecommons.org/licenses/by-nc-sa/3.0/za/ |
Page generated in 0.0016 seconds