<p> The room-temperature fracture behaviour of calcia partially stabilized zirconia (PSZ) was investigated. Fracture energy measurements were made using the standard stress intensity calibration and work to fracture techniques. The detailed nature of the PSZ microstructure was studied using scanning electron microscopy, qualitative X-ray analysis and T.E.M, surface replication. The grain structure was detenninod to be bimodal with small grains of pure zirconia dispersed along the boundaries of large grains. These large grains consist of a binary pure-zirconia/stabilized zirconia mixture. An attempt was made to relate the fracture properties to the nature of the inherent flaws present in the material. </p> <p> The strength of calcia partially stabilised zirconia was observed to depend on the size and distribution of the grain boundary precipitate of pure zirconia. It is postulated that this grain boundary precipitate causes decohesion and weakening of some of the grain boundaries due to the large internal stresses associated with its martensitic phase transformation. This phenomena of grain boundary decohesion leads to elastic nonlinearity and hysteresis. Crack propagation was always observed to proceed in a slow controlled fashion in this material. A model is proposed to explain theses observations based on the formation of a microcrack zone at the tip of a propagation crack. The occurrence of continued stable crack propagation is believed associated with increasing microcrack zone size with increasing crack length. Evidence supporting this model is presented. </p> / Thesis / Master of Science (MSc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/17884 |
| Date | 09 1900 |
| Creators | Green, David John |
| Contributors | Nicholson, P. S., Metallurgy and Materials Science |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds