Yes / The effect of screw configuration on granule size distribution (GSD) using gPROMS FormulatedProduct (gFP) software to perform optimization, estimation of complex processes, and analyses is evaluated. Twin-screw granulation modeling was used to investigate the contribution of screw configuration and liquid-to-solid (L/S) ratio on GSD. Lactose and Avicel were the granulating materials. Twelve different configurations were investigated under three feed rates as consistent with literature and at various L/S ratios. Results indicate that kneading elements promote the recovery of 100–1000 µm granules while reducing the production of oversized granules. Higher feed rates support the production of fines and agglomerates, while a low feed rate produces 100–1000 µm granules. / Ghana Scholarship Secretariat
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/19344 |
| Date | 17 February 2023 |
| Creators | Arthur, Tony B., Sekyi, Nana, Rahmanian, Nejat, Pu, Jaan H. |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Published version |
| Rights | © 2023 The Authors. Chemical Engineering Technology published by Wiley-VCH GmbH This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited., CC-BY |
Page generated in 0.0025 seconds