Return to search

Heat Transfer in Low Dimensional Materials Characterized by Micro/Nanoscae Thermometry / Heat Transfer in Low Dimensional Materials Characterized by Micro/Nanoscale Thermometry

In this study, the thermal properties of low dimensional materials such as graphene and boron nitride nanotube were investigated. As one of important heat transfer characteristics, interfacial thermal resistance (ITR) between graphene and Cu film was estimated by both experiment and simulation. In order to characterize ITR, the micropipette sensing technique was utilized to measure the temperature profile of suspended and supported graphene on Cu substrate that is subjected to continuous wave laser as a point source heating. By measuring the temperature of suspended graphene, the intrinsic thermal conductivity of suspended graphene was measured and it was used for estimating interfacial thermal resistance between graphene and Cu film.
For simulation, a finite element method and a multiparameter fitting technique were employed to find the best fitting parameters. A temperature profile on a supported graphene on Cu was extracted by a finite element method using COMSOL Multiphysics. Then, a multiparameter fitting method using MATLAB software was used to find the best fitting parameters and ITR by comparing experimentally measured temperature profile with simulation one. In order to understand thermal transport between graphene and Cu substrate with different interface distances, the phonon density of states at the interface between graphene and Cu substrate was calculated by MD simulation.As another low dimensional material for thermal management applications, the thermal conductivity of BNNT was measured by nanoscale thermometry. For this work, a noble technique combining a focused ion beam (FIB) and nanomanipulator was employed to pick and to place a single BNNT on the desired location. The FIB technology was used to make nanoheater patterns (so called nanothermometer) on a prefabricated microelectrode device by conventional photolithography processes. With this noble technique and the nanoheater thermometry, the thermal conductivity of BNNT was successfully characterized by temperature gradient and heat flow measurements through BNNT.

Identiferoai:union.ndltd.org:unt.edu/info:ark/67531/metadc1248488
Date08 1900
CreatorsJeong, Jae Young
ContributorsChoi, Tae-Youl, Choi, Wonbong, Zhao, Weihuan, Li, Xiaohua
PublisherUniversity of North Texas
Source SetsUniversity of North Texas
LanguageEnglish
Detected LanguageEnglish
TypeThesis or Dissertation
FormatText
RightsPublic, Jeong, Jae Young, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved.

Page generated in 0.0022 seconds