Power has become an important design closure parameter in today’s ultra low submicron
digital designs. The impact of the increase in power is multi-discipline to researchers ranging from power supply design, power converters or voltage regulators design, system, board and package thermal analysis, power grid design and signal integrity analysis to minimizing power itself. This work focuses on challenges arising due to increase in power to power grid design and analysis.
Challenges arising due to lower geometries and higher power are very well researched topics and there is still lot of scope to continue work. Traditionally, designs go through average IR drop analysis. Average IR drop analysis is highly dependent on current dissipation estimation. This work proposes a vector less probabilistic toggle estimation which is extension of one of the approaches proposed in literature. We have further used toggles computed using this approach to estimate power of ISCAS89 benchmark circuits. This provides insight into quality of toggles being generated. Power Estimation work is further extended to comprehend with various state of the art methodologies available i.e. spice based power estimation, logic simulation based power estimation, commercially available tool comparisons etc. We finally arrived at optimum flow recommendation which can be used as per design need and schedule.
Today’s design complexity – high frequencies, high logic densities and multiple level clock and power gating - has forced design community to look beyond average IR drop. High rate of switching activities induce power supply fluctuations to cells in design which is known as instantaneous IR drop. However, there is no good analysis methodology in place to analyze this phenomenon. Ad hoc decoupling planning and on chip intrinsic decoupling capacitance helps to contain this noise but there is no guarantee. This work also applies average toggle computation approach to compute instantaneous IR drop analysis for designs. Instantaneous IR drop is also known as dynamic IR drop or power supply noise. We are proposing cell characterization methodology for standard cells. This data is used to build power grid model of the design. Finally, the power network is solved to compute instantaneous IR drop.
Leakage Power Minimization has forced design teams to do complex power gating – multilevel MTCMOS usage in Power Grid. This puts additonal analysis challenge for Power Grid in terms of ON/OFF sequencing and noise injection due to it. This work explains the state of art here and highlights some of the issues and trade offs using MTCMOS logic. It further suggests a simple approach to quickly access the impact of MTCMOS gates in Power Grid in terms of peak currents and IR drop. Alternatively, the approach suggested also helps in MTCMOS gate optimization. Early leakage optimization overhead can be computed using this approach.
| Identifer | oai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/503 |
| Date | 03 1900 |
| Creators | Shah, Kalpesh |
| Contributors | Nandy, S K |
| Source Sets | India Institute of Science |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Relation | G21066 |
Page generated in 0.0016 seconds