Return to search

Tepelná vodivost u nestandardních materiálů pro TZB / The thermal conductivity of non-standard materials for HVAC

The thesis is focused on the determination of the thermal conductivity coefficient on the group of thermoplastics used for 3D printing (PLA, ABS, PETG). The thesis describes the materials used for 3D printing and the design of air conditioning for the grocery store. A stationary method was used for the solution. The heat flux passing through the sample was measured and the thermal conductivity coefficient was calculated. By the chosen method, we determined the coefficient is = 0,11-0,13 W/(m·K). Comparison with the available results of other methods and authors has shown that the resulting coefficient is lower. Based on the data, it is possible to compare the thermal properties of 3D printing materials.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:392068
Date January 2019
CreatorsBěťák, Karel
ContributorsRubinová, Olga, Uher, Pavel
PublisherVysoké učení technické v Brně. Fakulta stavební
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds