In calcium aluminate cement (CAC) systems the hydration process is different than portland cement (PC) systems. The hydration products of CAC are subjected to conversion depending on temperature, moisture, water-cement ratio, cement content, etc. Consequently, strength of CAC system can be seriously reduced. However, presence of other inorganic binders or additives may alter the hydration process and improve various properties of CAC based composites.
The objective of this study is to investigate the temperature effect on the behaviour of CAC based composite binders. Throughout this research, several combinations of CAC-PC, CAC-gypsum, CAC-lime, CAC-ground granulated blast furnace slag (CAC-GGBFS) were studied. These CAC based composite binders were subjected to seven different curing regimes and their strength developments were investigated up to 210 days. In addition, the mechanism of strength development was examined by XRD analyses performed at 28 and 210 days. Finally, some empirical relationships between strength-time-curing temperatures were formulated.
Experimental results revealed that the increase in ambient temperature resulted in an increase in the rate of conversion, thereby causing drastic strength reduction, particularly in pure CAC mix. It has been observed that inclusion of small amount of PC, lime, and gypsum in CAC did not induce conversion-free CAC binary systems, rather they resulted in faster conversion by enabling rapid formation of stable C3AH6 instead of metastable, high strength inducing CAH10 and C2AH8. On the other hand, in CAC-GGBFS mixes, the formation of stable straetlingite (C2ASH8) instead of calcium aluminate hydrates hindered the conversion reactions. Therefore, CAC-GGBFS mixes, where GGBFS ratio was over 40%, did not exhibit strength loss due to conversion reactions that occurred in pure CAC systems.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12607454/index.pdf |
Date | 01 August 2006 |
Creators | Kirca, Onder |
Contributors | Tokyay, Mustafa |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | Ph.D. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0019 seconds