This project examined the effect of Gurney flaps on a 2D, 2-ft chord NACA 0036 airfoil in the Cal Poly 3’x4’ low speed wind tunnel at 25 m/s. It also covered the numerical simulation of the experiment in computational fluid dynamics (CFD). During the study, problems with the wind tunnel data were seen. After a careful diagnosis, the problem was traced to dirty flow conditioners which were subsequently replaced.
Five Gurney flaps at 1, 2, 3, 4, and 5% of the chord were tested. The Gurney flaps had the effect of eliminating the lift reversal effect and lowering the profile drag at low angles of attack, ranging from 4-27%. The optimal Gurney flap appeared to be 2% of the chord. CFD modeling of the problem had limited success, with the best results coming from Mentor’s k-w SST turbulence model. This model reproduced the non-linear lift curve, and captured the trend in rising drag fairly well, but failed to predict the correct point of separation. Attempts to model the Gurney flap in CFD were unsuccessful.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-1554 |
| Date | 01 March 2011 |
| Creators | Altmann, Gregory F |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses |
Page generated in 0.0021 seconds