Return to search

An alternative gyroscope calibration methodology

D.Ing. (Electrical & Electronic Engineering Science) / The objective of the research performed in this thesis is to address the calibration process of Fiber-Optic Gyroscopes (FOGs) - a class of gyroscopes that make use of the Sagnac effect to determine rotational information from laser-light traveling in an optical fiber. The calibration process has traditionally been a time-consuming and therefore an expensive one due to the various environmental parameters that can influence the sensor under operation. Calibration is not a step that can be neglected as it is the process whereby the residual manufacturing errors in the sensor are characterized. If these measurement errors are not eliminated, the sensors would result in the host vehicle's assumed position rapidly diverging from its true position. Once the errors are characterized, they can be removed from the sensor output to improve the accuracy of the complete navigation system. The class of the sensor is determined by the amount of residual errors and the smaller the residual errors, the more expensive the sensor. The specific focus of the study is to determine whether it is possible to reduce the calibration cost of the Fiber-Optic Gyroscopes through the use of innovative calibration strategies. The use of neural networks are investigated as an alternative to the traditional calibration strategies which consists of the estimation of the constant error parameters through stochastic estimation strategies such as Kalman filters. The whole calibration problem is recast into the well-defined Systems Identification (SID) domain where the whole calibration problem is considered in terms of the systems identification design steps. The main contributions presented in this study are that the traditional calibration strategy is reviewed by casting the calibration problem into the Systems Identification domain; that a unified FOG error model is developed that combines a number of seemingly contradictory error models available in the technical literature; that computational intelligence techniques are used to perform gyro calibration; that a novel, non-linear gyro calibration strategy is developed; and that the sensors are calibrated under the simultaneous dynamic excitation of the full range of multi-dimensional environmental conditions. In the process of the development of this new calibration strategy the need for a problemspecific Criterion of Fit was observed. Such a Criterion of Fit was therefore developed and it acted as the core criterium whereby the accuracy of the new calibration strategy was assessed. One of the most important results obtained from the research presented in this thesis is that the new strategy significantly outperforms the traditional strategies and that, with the availability of high-performance embedded computational platforms, it has potential to be used within an operational environment as the gyro compensation strategy of choice.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:7790
Date25 November 2013
CreatorsDu Plessis, Jan Abraham Francois
Source SetsSouth African National ETD Portal
Detected LanguageEnglish
TypeThesis
RightsUniversity of Johannesburg

Page generated in 0.0018 seconds