Return to search

Virtual Sensors for Combustion Parameters Based on In-Cylinder Pressure / Skattning av förbränningsparametrar baserat på cylindertryckmätning

Typically the combustion in engines are open-loop controlled. By using an in-cylinder pressure sensor it is possible to create virtual sensors for closed-loop combustion control (CLCC). With CLCC it is possible to counteract dynamic effects as component ageing, fuel type and cylinder variance. A virtual sensor system was implemented based on a one-zone heat-release analysis, including signal processing of the pressure sensor input. A parametrisation of the heat-release based on several Vibe functions was implemented with good results. The major focus of the virtual sensor system was to perform a tolerance analysis on experimental data, where typical error sources in a production heavy-duty vehicle were identified and their effect on the estimates quantified. It could be concluded that estimates are very much dependent on the choice of heat-release and specific heat ratio models. Especially crank angle phasing has a large impact on estimation performance, stressing the importance of accounting for crankshaft torsion in production vehicles. Biodiesel advances the combustion angle and give a lower IMEP and total heat amount compared to standard diesel. However, error sensitivity is not affected. Further investigations must be made on improving the signal processing in terms of gain error compensation and filtering. Also a better understanding of how errors propagate between subsystems in a CLCC system is required for successful implementation.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-123490
Date January 2015
CreatorsJohansson, Tobias
PublisherLinköpings universitet, Fordonssystem
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0023 seconds