Flood is a natural phenomenon that occurs at different intensities and irregular time intervals. As to natural disasters, floods represent the greatest direct threat for the Czech Republic. They may cause serious critical situations during which not only extensive material damages are done, but may bring also losses of the lives of inhabitants in affected areas as well as vast devastation of cultural landscape including environmental damages. Important from the viewpoint of the elimination of potential threats and consequences of such events is the information issued by flood forecasting service about the character and size of flood areas for individual N-year flood discharges and specific flood scenarios. An adequate image of depths and flow rates in the longitudinal or cross profile of the watercourse during a flood event is provided by the hydrodynamic model. This is why the information obtained from the hydrodynamic models occupies a privileged position from the viewpoint of the protection of citizens' lives and mitigation of damage to their property. The first study is situated on the river Úhlava in meadows by Příchovice near the town Přeštice. The proposal of flood-protection measures is contained in Territorial control documentation. The documentation was elaborated on the basis of hydraulic calculations and experiences from the flood in August 2002. The mathematical model is practically used in the study of analysis of proposed flood-protection measures. The analysis is based on mathematical simulation of water outflow and water level on the river Úhlava. It is possible to use the non-commercial software Hec-Ras, version 3.1.1., for the simulation itself. One of the points of view of the possibility of using proposed flood-protection measures is total efficiency. The mathematical model is posssible to use as a basis of support for realization of proposed flood-protection measures on the river Úhlava in meadows by Příchovice within the grant programme "Program prevence před povodněmi II" under the control of the Ministry of Agriculture. In the second case the mathematical model is practically used in the study of hydrotechnical analysis of streams in cadastral unit. The analysis is based on matjematical simulation of water outflow and water level on chosen streams. It is possible to use the noncomercial software HEC-RAS for the own simulation. The analysis should be shown on dangerous places in the interest place. The mathematical model is possible of using to use as basis for revaluation of action in spatial plan or for view of the flood-protection measures in the village Mochtín. Basic input into the hydrodynamic models is represented by altimetry data. One of ways to obtain such data is through the method of aerial laser scanning (ALS) from the digital relief model (DRM). This method is considered one of the most accurate methods for obtaining altimetry data. Its bottleneck is however incapacity of recording terrain geometry under water surface due to the fact that laser beam is absorbed by water mass. The absence of geometric data on watercourse discharge area may perceptibly affect results of modelling, especially if a missing part of the channel represents a significant discharge area with its capacity. One of methods for eliminating the deficiency is a sufficient channel recess by means of software tools such as CroSolver. The third submitted paper deals with the construction of a hydrodynamic model using 5th generation DRM data, and compares outputs from this model at various discharges with a model based on the altimetry data modified by using the CroSolver tool. Outputs from the two hydrodynamic models are compared in HEC-RAS programme with the use of recessed data and with the use of unmodified DRM. The comparison is done on the sections of two watercourses with different terrain morphology and watercourse size. A complementary output is the comparison of inundation areas issuing from both model variants. Our results indicate that differences in the outputs are significant namely in the lower discharges (Q1, Q5) whereas for Q50 and Q100 the difference is negligible with a great role being played by morphology of the modelled area and by the watercourse size.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:259599 |
Date | January 2015 |
Creators | Kurková, Marie |
Contributors | Vašků, Zdeněk, Michal, Michal |
Publisher | Česká zemědělská univerzita v Praze |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds