Organic electronics based on π-conjugated semi-conductor raises new technology, such as organic film transistors, e-paper, and organic photovoltaic cells that can be implemented cost-effectively on large-area applications. Currently, the device performance is limited by low charge carrier mobility. Poly(3-hexylthiophene) (P3HT) and organic field effect transistors (OFET) is used as a model to investigate morphology of the organic film and corresponding electronic properties. In this thesis, processing parameters such as boiling points and solubility are controlled to impact the micro- and macro-morphology of the film to enhance the charge transport of the device.
Alternative approach to improve ordering of polymer chains and increase in charge transport without post-treatment of P3HT solution is studied. The addition of high boiling good solvent to the relatively low boiling main solvent forms ordered packing of π-conjugated polymers during the deposition process. We show that addition of 1% of dichlorobenzene (DCB) to the chloroform based P3HT solution was sufficient to improve wetting and molecular structures of the film to increase carrier mobility.
Systematic study of solvent-assisted re-annealing technique, which has potential application in OFET encapsulation and fabrication of top-contact OFET, is conducted to improve mobility of OFET, and, to suggest a cost-effective processing condition suitable for industrial application. Three process parameters: boiling point, polarity, and solubility are investigated to further understand the trend of film response to the solvent-assisted technique. We report the high boiling non-polar solvents with relatively high RED values promote highest improvement in molecular packing and formulate crystalline structure of the thin film, which increases the device performance.
Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/50409 |
Date | 13 January 2014 |
Creators | Lee, Jiho |
Contributors | Reichmanis, Elsa |
Publisher | Georgia Institute of Technology |
Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
Language | en_US |
Detected Language | English |
Type | Thesis |
Format | application/pdf |
Page generated in 0.0189 seconds