Yes / Titanium alloys are known for their excellent corrosion resistance; however, low surface hardness results in poor wear resistance, which limits its potential application. This study employs a novel two-step process to embed a hard Ni coating containing a mixture of nanosized particles (Al2O3 and TiO2) into the surface of the Ti-6Al-4V alloy using an electric arc produced during the inert tungsten gas welding process. The surface of the sample was evaluated using Vickers Microhardness, Scanning electron microscopy, Energy dispersive spectroscopy and pin-on-plate wear testing. Microstructural analysis showed that impregnating the titanium surface with Ni/(Al2O3 and TiO2) nanomaterials resulted in the formation of a hard martensitic structure to a depth of approximately 2 mm below the surface. The changes observed are driven by modification of the surface chemistry and the presence of nickel, causing grain size reduction, solid solution strengthening and dispersion strengthening of the treated layer by the nanoparticles. The hardness of the treated layer increased by more than 180% when 40 nm Al2O3 and 30 nm TiO2 particles were embedded into the surface. Similarly, the wear resistance of the treated surface improved by 100%.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/19307 |
| Date | 09 January 2023 |
| Creators | Cooke, Kavian O., Alhubaida, A. |
| Publisher | Natyre |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Published version |
| Rights | © The Author(s) 2022. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/., CC-BY |
Page generated in 0.002 seconds