M.Ing. / There are different types of heat transfer enhancement techniques that can be used, but some of these techniques are expensive and cannot be afforded by small manufacturing firms. An easy and affordable technique considered in this paper has an angled spiralling tape inserted into the annulus of a tube-in-tube heat exchanger. The purpose of this paper was to determine the single phase heat transfer and pressure drop characteristics in the annulus. Experimental measurements were taken on four set-ups; a normal tube-in-tube heat exchanger used as a reference and three heat exchangers with different angled spiralling tape inserts. From the results correlations were developed that can be used to predict the heat transfer and pressure drop characteristics. It was concluded that the angled spiralling tape inserts resulted in an increase in the heat transfer and pressure drop characteristics as can be expected.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:1716 |
Date | 21 November 2011 |
Creators | Coetzee, Hennie |
Source Sets | South African National ETD Portal |
Detected Language | English |
Type | Thesis |
Page generated in 0.0021 seconds