A miniature reciprocating expander is being developed as part of a larger program
to develop a heat actuated heat pump for portable applications. By utilizing the higher
energy density of liquid hydrocarbon fuels relative to batteries, a heat actuated heat pump
would be able to provide cooling for much longer than motor driven units of equal
weight. A prototype expander has been constructed and demonstrated to produce up to
22 W of shaft power at 2500 rpm using 60 psig, room temperature nitrogen as the input.
Assuming adiabatic conditions, the expander appears to operate at up to 80% isentropic
efficiency. However, when heat inflow to the expander is accounted for, the resulting
polytropic efficiency is about 10% lower. In addition to experimental results, models of
expander performance with different loss mechanisms are presented. These mechanisms
include over- and under-expansion, in-cylinder heat transfer, clearance volume, friction,
and valve pressure drop. / Graduation date: 2005
Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/31699 |
Date | 21 September 2004 |
Creators | Herron, Thomas G. |
Contributors | Peterson, Richard B. |
Source Sets | Oregon State University |
Language | en_US |
Detected Language | English |
Type | Thesis/Dissertation |
Page generated in 0.0015 seconds