The aim of this master thesis is selection of heat treatment for additive manufactured multimaterial components composed of 1.4404 and 1.4542 stainless steels regarding their magnetic and mechanical properties. Individual materials were studied after fabrication and also after the same heat treatments. The chosen process consists of solution annealing and subsequent precipitation hardening. A significantly higher value of maximum relative permeability and lower of coercive field of 1.4542 steel were achieved. At the same time, the relative permeability of 1.4404 was not considerably influenced. A decrease in Rp0,2 of 1.4404, but an increase in Rm and Rp0,2 values of 1.4542 steel were observed. Elongation at break A increased in the case of both alloys. The experiments proved that multimaterial components composed of these stainless steels can be successfully manufactured by SLM technology. It is therefore possible to design and manufacture stainless steel components of magnetic circuits and adjust their magnetic and mechanical properties by heat treatment.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:447550 |
| Date | January 2020 |
| Creators | Schäffer, Matúš |
| Contributors | Hutař, Pavel, Paloušek, David |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds