In this thesis an equation of heat conduction including phase and structural changes is derived, involving various boundary conditions. It seems to be the most suitable to calculate the equation by enthalpy method. In this equation not only enthalpy occurs, but also the temperature, and in consequence the relationship between these variables is quite complicated. In this paper I use the values measured or calculated using solidifcation models. The calculation is implemented in Matlab Simulink, which is a very popular blocks scheme in common practice of regulation. The calculation is based on steady state set up with help of experts and as a result, the program could be put into practice. The program calculates the intensity of cooling according to the initial casting speed, casting inlet temperature and the desired temperature curves. The rate of inuence of cooling can be changed according to the given criteria. The thesis compares the surface temperatures and cooling in the case of a predictive controller is or is not applied in the program.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231399 |
| Date | January 2014 |
| Creators | Zemanová, Hana |
| Contributors | Mauder, Tomáš, Štětina, Josef |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0011 seconds