This master thesis is focused on surface hardening by using disk laser. Ten samples made of 42CrMo4 steel were hardened at varying speeds of quenching and diameter of the laser beam. The theoretical part initially describes the types of lasers. Further it describes methods of surface hardness processing such as kinds of hardening and chemical-thermal treatment, followed by description of the used material. Images of macrostructure, microstructure and compared values of hardness of single samples are evaluated in the experimental part. The thesis subsequently contains a technical-economic evaluation. Appropriate parameters for surface laser hardening are evaluated in the conclusion.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231069 |
Date | January 2015 |
Creators | Kříž, Daniel |
Contributors | Daněk, Ladislav, Mrňa, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0034 seconds