In-line heat treatment is a part of technological process uses a phase and structure changes to obtain required mechanical properties. Heat treatment of rolled products offers a reduction of steel making costs and a creation of new steel products. For example the TRIP steel is a part of modern steels which is used in the automobile industry for higher safety of passengers. The heat treatment is often described in the literature. But the authors are often focused on the method how to get the required structure and mechanical properties for different metallic materials. Nevertheless just few articles are focused on the technical observing of temperature regimes and which parameter is necessary to consider during designing the cooling section. Eight parameters were tested by the experimental way to examine their influence on the cooling intensity. They were: gravity (orientation of the cooled surface), coolant pressure, amount of coolant spraying on the surface (the flow rate), rolling velocity, nozzle configuration, kind of nozzles (full cone or flat fan nozzle), coolant temperature and the surface quality (surface roughness and scales). All these parameters have an influence the heat transfer coefficient. Based on knowledge gained in this work was created the cooling section, which comply with the required cooling temperature regimes.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234019 |
Date | January 2012 |
Creators | Hnízdil, Milan |
Contributors | Raudenský, Miroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0076 seconds