This study is to analyze and test the extrusion process of a hollow spur gear and a solid helical product with magnesium alloy. In the hollow spur gear part, firstly, a design criterion to determine the forming parameters is proposed. Then, the Finite Element Analysis is used to simulate the flow pattern of the billet from separating channel, welding chamber to die bearing part. From a series of simulation results, the effect of separating channel length, mandrel entrance angle, welding chamber height, etc. on the radial filling ratio, welding pressure, extrusion load, etc. are found. By using the Taguchi Methods, we can find the most important parameters. Finally, a better die geometry is designed to obtain a sound product. In the helical product part, the Finite Element Analysis is used to get the understandings of radical filling ratio of magnesium alloy in the helical zone. Then, a better die geometry is designed from the results of analyses.
Finally, hot extrusion experiments of a hollow spur gear and a solid helical product are conducted. The experimental values of the extrusion load and the product¡¦s dimension are compared with the analytic values to verify the validity of the analytic models.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0903111-185222 |
Date | 03 September 2011 |
Creators | Lin, Sung-Hsiu |
Contributors | Wei-Ching Yeh, Woei-Shyan Lee, Gow-Yi Tzou, Yeong-Maw Hwang, Fuh-Kuo Chen |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0903111-185222 |
Rights | user_define, Copyright information available at source archive |
Page generated in 0.0017 seconds