Methane-air, ethane-air, and n-heptane-air over-ventilated co-flow laminar diffusion flames were studied up to pressures of 2.03, 1.52, and 0.51 MPa, respectively, to determine the effect of pressure on flame shape, soot concentration, and temperature. A spectral soot emission optical diagnostic method was used to obtain the spatially resolved soot formation and temperature data. In all cases, soot formation was enhanced by pressure, but the pressure sensitivity decreased as pressure was increased. The maximum fuel carbon conversion to soot, ηmax, was approximated by a power law dependence with the pressure exponent of 0.92 between 0.51 and 1.01 MPa, and 0.68 between 1.01 and 2.03 MPa with ηmax=9.5% at 2.03 MPa for methane-air flames. For ethane-air flames, the pressure exponent was 1.57 between 0.20 and 0.51 MPa, 1.08 between 0.51 and 1.01 MPa, and 0.58 between 1.01 and 1.52 MPa where ηmax=23% at 1.52 MPa. For nitrogen-diluted n-heptane-air flames, ηmax=6.5% at 0.51 MPa.
Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/27342 |
Date | 30 May 2011 |
Creators | Intasopa, Gorngrit |
Contributors | Gulder, Omer L. |
Source Sets | University of Toronto |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.0014 seconds