The work presented in this thesis has demonstrated that the use of elemental profiles for the quality control of herbal medicines can be applied to multiple stages of processing. A single method was developed for the elemental analysis of a variety of St John’s Wort (Hypericum perforatum) preparations using Inductively Coupled Plasma – Optical Emission Spectroscopy (ICP-OES). The optimised method consisted of using 5 ml of nitric acid and microwave digestion reaching temperatures of 185⁰C. Using NIST Polish tea (NIST INCT-TL- 1) the method was found to be accurate and the matrix effect from selected St John’s Wort (SJW) preparations was found to be ≤22%. The optimised method was then used to determine the elemental profiles for a larger number of SJW preparations (raw herbs=22, tablets=20 and capsules=12). Specifically, the method was used to determine the typical concentrations of 25 elements (Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, Hg, In, Mg, Mn, Mo, Ni, Pb, Pt, Sb, Se, Sr, V, Y and Zn) for each form of SJW which ranged from not detected to 200 mg/g. To further interpret the element profiles, Principal Component Analysis (PCA) was carried out. This showed that different forms of SJW could be differentiated based on their elemental profile and the SJW ingredient used (i.e. extract or raw herb) identified. The differences in the profiles were likely due to two factors: (1) the addition of bulking agents and (2) solvent extraction. In order to further understand how the elemental profile changes when producing the extract from the raw plant, eight SJW herb samples were extracted with four solvents (100% water, 60% ethanol, 80% ethanol and 100% ethanol) and analysed for their element content. The results showed that the transfer of elements from the raw herb to an extract was solvent and metal dependent. Generally the highest concentrations of an element were extracted with 100% water, which decreased as the concentration of ethanol increased. However, the transfer efficiency for the element Cu was highest with 60% ethanol. The solvents utilised in industry (60% and 80% ethanol) were found to preconcentrate some elements; Cu (+119%), Mg (+93%), Ni (+183%) and Zn (+12%) were found to preconcentrate in 60 %v/v ethanol extracts and Cu (+5%) and Ni (+30%). PCA of the elemental profiles of the four types of extract showed that differentiation was observed between the different solvents and as the ethanol concentration increased, the extracts became more standardised. Analysis of the bioactive compounds rutin, hyperoside, quercetin, hyperforin and adhyperforin followed by subsequent Correlation Analysis (CA) displayed relationships between the elemental profiles and the molecular profiles. For example strong correlations were seen between hyperoside and Cr as well as Quercetin and Fe. This shows potential for tuning elemental extractions for metal-bioactive compounds for increased bioactivity and bioavailability; however further work in needed in this area.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:601770 |
| Date | January 2014 |
| Creators | Owen, Jade Denise |
| Publisher | University of Hertfordshire |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/2299/13233 |
Page generated in 0.0016 seconds