This thesis provides an overall evaluation of the concept of inline injection pump for pressure 120 MPa. The name of this pump is "Mj" and it is a product of the Motorpal, a.s. company. This thesis also contains an analysis of the contact pressures between the cam lobe and the pumping element's roller tappet. This includes comparing three different shapes of the roller and their influence on the magnitude of contact pressures. Calculations of the plunger helix and of the fuel delivery's impact on the relative position of plunger are also present.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:254438 |
| Date | January 2016 |
| Creators | Tichý, Ondřej |
| Contributors | Štěpánek, Karel, Dundálek, Radim |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds