This century has seen a phenomenal growth in energy demands and environmental pollution, which has given rise to a worldwide awareness for the need to address these issues immediately. / This thesis focuses on the fabrication of high performance electrocatalysts applied in fuel cells and developing appropriate advanced oxidation processes for environmental remediation. It has been shown that ultrasonic irradiation is a promising method of synthesizing nanometre sized metal colloids with specific properties. Sonophotocatalysis has proved to be an effective process for the degradation of organic pollutants / The synthesis of platinum monometallic and platinum-ruthenium bimetallic nanoparticles was successfully achieved by using sonochemical irradiation. A chemical method and a hybrid method were used to reveal and understand the process of Ru(III) reduction by sonochemistry. TEM images of the Pt and PtRu monometallic/bimetallic particles indicate typical diameters of less than 10 nm. An effort was made to investigate the influence of two different methods, namely simultaneous and sequential sonochemical reduction, on the structure and formation of PtRu bimetallic nanoparticles. It has been shown that the sequential reduction method produces a relatively higher yield of core-shell nanoparticles than the simultaneous reduction method. It has been concluded that Pt nanoparticles, which are formed first, play an important role in catalysing the formation of Ru nanoparticles. / A number of methods including chemical, sonochemical and radiolytic synthesis were used to fabricate platinum and platinum-ruthenium monometallic/bimetallic nanoparticles. Furthermore, the evaluation of the electrocatalytic performance of these particles was performed by using cyclic voltammetry. Simultaneous and sequential methods for the synthesis of PtRu were adopted to investigate their influence on the electrocatalytic performance of these bimetallic nanoparticles. thas been shown that simultaneous reduction is an effective means of fabricating high performance electrocatalytic PtRu catalysts. A number of experiments with different ratios of platinum to ruthenium ions in precursor solution were carried out to study the effect of the ruthenium composition in platinum-ruthenium electrodes. It has been found that the methanol oxidation ability of platinum-ruthenium bimetallic nanoparticles can change with the alternation of ratio of Pt(II) to Ru(III) in the precursor solution. Simultaneous radiolytic reduction has the potential to fabricate higher performance electrocatalytic bimetallic nanoparticles. / Although both photo-oxidation and sono-oxidation techniques are fascinating solutions to the environmental problems at hand, the critical limit of these individual processes is their low efficiency of environmental remediation. In my project, sonolysis and photocatalysis (sonophotocatalysis) have been simultaneously employed to degrade selective organic pollutants in aqueous environments, such as methyl orange, p-chlorobenzoic acid, p-aminobenzoic acid and p-hydroxybenzoic acid. Experiments have been carried out in order to improve the efficiency of sonophotocatalytic reactions to ensure that a substantial amount of the electrical energy is utilized in degrading the organic pollutants. / Methyl orange, an azo dye, was selected as the degradation target for sonophotocatalysis. An orthogonal array analysis method was employed to clarify the correlation between the efficiencies of sonolysis, photocatalysis and sonophotocatalysis and the various operation conditions studied. Emphasis was placed on investigating the influence of pH and the ultrasound parameters on these three advanced oxidation processes. It was of interest to find that the degradation of methyl orange originates from hydroxylation and demethylation processes preceding aromatic ring-opening. / Sonophotocatalysis was also applied in the degradation of three aromatic carboxylic acids, p-chlorobenzoic acid, p-hydroxybenzoic acid and p-aminobenzoic acid. Experiments were carried out in order to get a thorough understanding of the synergy effects produced by combining the two oxidation techniques. A number of advanced analytical techniques, such as HPLC and Q-TOF MS/LC, were employed to comprehensively monitor and analyse the sonophotocatalytic degradation process. It has been found that synergistic effects of the combined system have been identified with respect to the parent organic pollutant as well as its degradation products. Additionally, products were quantitatively analysed by a kinetic simulation method in order to understand the reaction mechanism. This method also allowed us to quantify the synergy effects. It was observed that the solution pH played a key role in determining the degradation rate and controlling the direction of the degradation reaction. Based on the analytical data gathered, the sonophotocatalytic degradation pathway of the aromatic carboxylic acids was established. The experimental results suggest that the sonophotocatalytic technique is likely to lead to a complete mineralization of organic pollutants in aqueous solutions.
| Identifer | oai:union.ndltd.org:ADTP/245693 |
| Date | January 2009 |
| Creators | HE, Yuanhua |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Terms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access |
Page generated in 0.0018 seconds