The presented diploma thesis deals with the evaluation of the influence of the addition of 30, 60 and 90 % of recycled material on the structure and mechanical properties of high-density polyethylene (HDPE), where recycled material represents both HDPE from a several years old part and material multiple reprocessed by extrusion. The changes of supramolecular structure were examined by calorimetric measurement, which did not indicate degradation of the material due to multiple extrusion. Mechanical properties were investigated by tensile tests and dynamic-mechanical analysis. Both measurements showed the same trend, where the first and second pass of the material through the extruder led to improved mechanical properties, e.g. to increase stiffness, while the influence of the third and fourth passes through the extruder had not a significant effect on the mechanical properties. In terms of the structure and mechanical properties, a positive effect of the combination of material after the second extrusion passing (30%) with virgin material was recorded.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444213 |
| Date | January 2021 |
| Creators | Handlíř, Tadeáš |
| Contributors | Poláček, Petr, Bálková, Radka |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0028 seconds