In this dissertation, a predictive (scalable) measurement-based PEEC modeling method for high-frequency interconnects on low-cost FR4 substrates is proposed and demonstrated. The interconnects are modeled with equivalent circuits of scalable building blocks using a rapid and accurate optimization method to fit parameter data up to 10 GHz. The predictive power of the developed scalable models is demonstrated in several extended interconnect structures and the ability to use interpolation to predict the high frequency performance of structures with differently sized building blocks is demonstrated. The usefulness of the proposed modeling method is validated by comparing predictions to measurements both in frequency domain and in time domain. The efficiency and accuracy of the method are also compared with the Advanced Design System (ADS) momentum simulation tool. The results show that this proposed high-frequency interconnect modeling method is very much more efficient in terms of simulation time, while maintaining comparable accuracy, compared to momentum simulations and measured behavior.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/7108 |
| Date | 13 May 2005 |
| Creators | Shin, Jaemin |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Language | en_US |
| Detected Language | English |
| Type | Dissertation |
| Format | 15732925 bytes, application/pdf |
Page generated in 0.0016 seconds