<p> There is a great need for sensors that can infer the properties of polymer latices. Measuring ultrasonic wave travel parameters through a latex and calibrating these against polymer properties is one potential technique for measuring the polymer properties of a latex without separating the polymer particles from water. Ultrasonic longitudinal waves can be characterized by three travel parameters: the velocity, the attenuation and the frequency. For colloidal systems the attenuation will depend on molecular properties of the system inside a frequency window where diffraction and scattering are negligible.</p> <p> In this thesis the equipment for measuring ultrasonic waves is discussed and a measurement cell for measuring waves in liquids is designed and built. This equipment is used to measure the velocity and attenuation as functions of frequency for two sets of copolymer latices. These latices were measured separately using a combination of standard quality control analyses and polymer characterization techniques. It was discovered that the velocity of sound through latices does not differ significantly from the velocity for pure water while the ultrasonic attenuation of latices at solids concentrations of greater than 10 percent is much greater than the value for pure water.</p> <p> For the copolymer latices produced from styrene and methyl-methacrylate the attenuation measurements were all too similar to distinguish between changes in the properties of the latex. For the copolymer latices produced from styrene and butadiene, the attenuation and composition were related by an approximately linear relationship between 30 and 80 mole percent styrene. In this region, the attenuation spectra were regressed onto the property space using a linear multivariate algorithm called projection to latent structures. It was found that the attenuation is only useful for predicting latex properties that are related to composition in this range. Future work should focus on the use of a non-linear regression technique to model the behaviour of attenuation over the entire composition range and the use of independent analyses to better characterize some of the polymer properties such as crosslinking.</p> / Thesis / Master of Engineering (MEngr)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/19226 |
| Date | 10 1900 |
| Creators | Wasmund, Eric B. |
| Contributors | MacGregor, J. F., Chemical Engineering |
| Source Sets | McMaster University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0033 seconds