To improve the performance of the three-way catalytic (TWC) converter, advanced control strategies and onboard diagnostics (OBD) systems are needed. Both rely on a relatively accurate but computationally efficient TWC converter model. This thesis aims to develop a control-oriented model that can be employed to develop the control strategies and OBD systems of the TWC converter.
The thesis consists of two parts, i.e., the high-fidelity model development and the model reduction. Firstly, a high-fidelity model is built using the energy and mass conservation principles. In this model, a constant inlet simulation is used to validate the warming-up characteristics, and a driving cycle simulation is used to calibrate the reaction rate parameters. The results of the simulation show that the high-fidelity model has adequate accuracy. Secondly, a reduced-order model is developed based on phase and reaction simplifications of the high-fidelity model. The aim of the development of the reduced-order model is to propose a computationally efficient model for further development of control strategies and state estimators for OBD systems. The accuracy of the reduced-order model is then validated by means of simulations. / Thesis / Master of Science (MSc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/23381 |
| Date | January 2018 |
| Creators | Li, Tongrui |
| Contributors | Yan, Fengjun, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0089 seconds