Roundabout installations are becoming common practice among DOTs and other local governments due to their superior safety attributes compared to other conventional at-grade intersections, especially stop-control and uncontrolled intersections. Current U.S. national guidelines for roundabout illumination recommend systematic illumination for all roundabouts. This recommendation might become a potential hindrance to desired widespread installations due to implied financial costs, especially in rural areas because the competing stop-control and uncontrolled intersections can be kept unlit. Interestingly rural roundabouts in most countries around the world are not illuminated as indicated by a recent survey of international roundabout illumination policies and standards from 45 countries. Also, review of intersection safety literature does not identify any publication that supports a systematic illumination policy of U.S. roundabouts. In fact, despite this recommendation there is no quantitative research on influence of illumination levels on nighttime safety at roundabouts and little on conventional intersections. Conversely, the literature shows a significant number of published studies which have indicated that currently recommended illumination levels on roadways can be reduced without compromising nighttime safety.
This dissertation evaluates the link between roundabout crashes and different illumination levels. At the beginning of this dissertation research, there was no available repository of quantitative intersection illumination levels which could be used in highway safety research. Also, existing protocols for measurement require expensive light meters and are extremely time consuming to follow, making them impractical to use to study a large number of intersections. Consequently, this dissertation first evaluates the relationship with the best available data. The best available intersection illumination data was obtained from the Minnesota data contained in the Highway Safety Information System (HSIS). Minnesota crash and illumination data from 2003 to 2010 were analyzed. This illumination data was a qualitative description of intersection illuminating schemes and/or luminaire arrangement. Therefore, this dissertation also developed a cost-effective, accurate, and rapid method for measurement of quantitative intersection illumination data, and applied the developed protocol to a case study in Georgia. The measured intersection illumination was analyzed together with crash data obtained from GDOT for 2009 to 2014.
The results of a naive analysis on the best available data indicated among other findings that the presence of lighting can provide approximately 61 percent lower total nighttime crash rate compared to the unlit condition. Also, providing illumination to the roundabout circle alone can yield about 80 percent of the benefits (55 percent reduction from unlit condition) of illuminating both the roundabout circle and approaches (66 percent reduction from unlit condition).
Field test results for the camera calibration indicate that the average intersection illuminance derived from the protocol is within 4 percent difference of the actual average intersection illumination estimated from following the existing protocols. Next, despite limited roundabout data and potential issues of selection bias which could not be addressed in this dissertation, a cautious roundabout illumination specific crash modification factor was estimated with a negative binomial regression model. The model results showed that an increase of 1 lux in average roundabout illuminance will result in a 4.72 percent reduction in expected number nighttime crashes.
The results of this work are useful in creating a sound framework for DOTs and other transportation agencies to determine the most appropriate level of illumination for roundabouts. This study also makes a number of significant contributions to highway safety research. First, this work is the first quantitative study on the impact of illumination on safety at roundabouts. The status-quo for highway safety research regarding the impacts of illumination had been to treat road lighting as a binary (Lit/Unlit) variable. However, even in most places without purposely-built road lighting there is usually ambient lighting from abutting facilities such as a gas stations or a store. Second, this dissertation is the first documented application of the photographic method to roundabouts. It is also the first documented application of the photographic method’s camera specific constant calibration approach to transportation field measurements. Previous documented application of the photographic method to transportation field measurements used an exposure specific calibration approach. Unlike the camera specific constant calibration approach, the exposure specific approach is rigid and field measurements must always be done at the exposure settings used in calibrating the camera. Thirdly, this work demonstrates the first developed procedure to developing uniformity (contour) plots from the photographic method. Next, this work can serve as the basis for initial efforts to create an illumination specific quantitative crash modification factor. Currently, the Highway Safety Manual is lacking in this important safety parameter. Last, but not the least this work offers procedures for collecting luminance data from the field and also documents a database of intersection illumination levels and intersection characteristics which can be used by future research.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/54453 |
| Date | 07 January 2016 |
| Creators | Gbologah, Franklin E. |
| Contributors | Rodgers, Michael O. |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Language | en_US |
| Detected Language | English |
| Type | Dissertation |
| Format | application/pdf |
Page generated in 0.0024 seconds