This thesis deals with measurement of residual stress by hole drilling method. This method is based on drilling a hole and measurement of deformation in the area around this hole. Measured deformations are then converted to residual stresses by using calibration coefficients. The deformation around the drilled hole is measured by optical non contact method called digital image correlation (DIC). First part of the thesis is focused on current state of research. The thesis contains evaluation of residual stresses by using different methods and evaluation of used methods.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:418191 |
| Date | January 2020 |
| Creators | Kováříková, Sabina |
| Contributors | Kubík, Petr, Návrat, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds