Return to search

Amine-functionalized polymeric hollow fiber sorbents for post-combustion CO₂ capture

Polymeric hollow fiber sorbents were functionalized with amine moieties for improving the carbon dioxide sorption capacity from flue gas to reduce the greenhouse gas emissions from coal-fired power plants. Three different experimental pathways were studied to form the amine-functionalized hollow fiber sorbents. Aminosilane functionalized cellulose acetate (CA) fibers, polyethyleneimine (PEI) functionalized polyamide-imide (PAI, Torlon® fibers and PEI post-infused and functionalized Torlon®-silica fibers were formed. CO₂ equilibrium sorption capacity data were collected by using the pressure decay sorption cell and thermal gravimetric analyzer. Other physio-chemical properties of the amine-functionalized fiber sorbents were characterized by using fourier-transform infrared spectroscopy, elemental analysis, and scanning electronic microscopy. Different reaction conditions were studied on the effect of sorption isotherms. Aminosilane-CA fibers were the first proof-of-concept for forming the amine functionalized polymer hollow fibers. PEI-PAI fibers were designed as a new method to reach enhanced sorption capacities than Aminosilane-functionalized CA fibers. PEI post-infused and functionalized Torlon®-silica fibers have further enhanced sorption capacity; however they easily degrade with similar reaction for forming PEI-PAI fibers. Lumen-side barrier layers were created successfully via post-treatment technique of using the crosslinked Neoprene® polymer onto PEI-functionalized PAI fibers. PEI-functionalized PAI fibers also have good cyclic stability and low heat of sorption.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/53119
Date12 January 2015
CreatorsLi, Fuyue
ContributorsKoros, William J.
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Detected LanguageEnglish
TypeDissertation
Formatapplication/pdf

Page generated in 0.0017 seconds